Prof. Vladimir Lyandres - Electronic Communication Facilities. ...More About
Dr. Lev Nelik - Pumps and Pumping Equipment. ...More About
Dr. Boris Menin - Refrigeration Systems and Equipment. ...More About
Dr. Leonid Avrukh - Methods and equipment of waste water treatment. ...More About
Eng. Gregory Katz - Mechanical engineering design. ...More About
Eng. Vladimir Koren - Electrical Engineering, Automatic Systems and Equipment. ...More About
The 3 last news
1st Annual Conference and Exhibition on pumps (Middle East)
- by VK 16/08/2010 @ 16:32
Pumping Machinery, LLC (USA) convenes the 1st Annual Pump Conference and Exhibition at the Middle East.
Herzliya (northern Tel-Aviv), Israel, November 22-23, 2010
Rotating Machinery Maintenance, Reliability and Energy Savings
The conference carried out jointly with the leading pumps' and pump-related equipment manufacturers, suppliers and pump users.
Program intended for engineers, professionals of maintenance, operating and management of municipal Water and Wastewater systems, Power Plants, Chemical Plants, HVAC, Pulp and Paper mills.
List of the topics:
Session #1 "Centrifugal Pumps"
Single-stage end suction ANSI centrifugal pumps.
Focus on Efficiency and Energy Savings: Dr. Lev Nelik, P.E., Pumping Machinery, LLC, (USA/Israel).
Double suction centrifugal pumps design variations and effects on reliability: Haim Shlomo, Siniaver Pumps (Israel)
Vertical pumps maintenance Issues and Challenges for Proactive Maintenance Approach: Gabi Klein, Gennady Heifetz, Michael Benjamin, Mekorot / EMS Shaham (Israel)
Session #2 "Abrasive, Corrosive and Specialty Applications"
Paper Mill Pump Applications: Amnon Sharon, Mondi Hadera Paper Development and Infrastructure (Israel)
Abrasive Pumping Challenges: Menahem Weiss, Dead Sea Works (Israel)
Boiler Feed Pump Aspects for Power Generation: Marchel Kalmanovich, Israeli Electric Corporation (Hevrat Hashmal)
Chemical Issues with Pumps: Boris Rechtman, ICL Chemicals (Israel)
Sessions #3 "Electrical Aspects"
Motor efficiency, VFD, controls, and line losses: Oscar Heinhorn, Enercom Engineering (Israel), Mario Berman, Israel Electric Corporation, and Arik Dan, Yaskawa (Japan)
Session #4
Positive Displacement Rotary Pumps: Jim Brennan, IMO/Colfax Pumps Corporation (USA/Europe), Maty De-Haas, Berlin Technologies (Israel), and Moshe Rozenbloom, Polak Brothers (Israel)
Session #5
Pumping Challenges at Municipalities: Eli Bronstein, Dimona vice-mayor (Israel)
Session #6
Mechanical Seals versus Seal-Less Pumps: Yossi Avisar, Laor Engineering (Israel), and Rammy Shellef, Ettem Seals (Israel)
Vibration Analysis for Rotating Machinery: Dr. Leonid Avrukh, PMME (Israel), and Dr. Elia Schwartz , Predictive Systems Engineering (Israel)
Cost (check or credit card):
Attendees: $100 (400 shekels) before September 15, 2010 ($200 after that date) - Group Discounts: 10% (5+ people) / 25% (10+ people) Exhibitors (tabletops): $1000 (4000 shekels) before September 15, 2010 ($2000 after that date)
To get more information about location, fees, display opportunities or on other questions to Advisory Committee, contact Dr. L. Nelik, P.E., by phone:
Pumping Machinery, LLC (USA) convenes the 1st Annual Pump Conference and Exhibition at the Middle East.
Herzliya (northern Tel-Aviv), Israel, November 22-23, 2010
Rotating Machinery Maintenance, Reliability and Energy Savings
The conference carried out jointly with the leading pumps' and pump-related equipment manufacturers, suppliers and pump users.
Program intended for engineers, professionals of maintenance, operating and management of municipal Water and Wastewater systems, Power Plants, Chemical Plants, HVAC, Pulp and Paper mills.
List of the topics:
Session #1 "Centrifugal Pumps"
Single-stage end suction ANSI centrifugal pumps.
Focus on Efficiency and Energy Savings: Dr. Lev Nelik, P.E., Pumping Machinery, LLC, (USA/Israel).
Double suction centrifugal pumps design variations and effects on reliability: Haim Shlomo, Siniaver Pumps (Israel)
Vertical pumps maintenance Issues and Challenges for Proactive Maintenance Approach: Gabi Klein, Gennady Heifetz, Michael Benjamin, Mekorot / EMS Shaham (Israel)
Session #2 "Abrasive, Corrosive and Specialty Applications"
Paper Mill Pump Applications: Amnon Sharon, Mondi Hadera Paper Development and Infrastructure (Israel)
Abrasive Pumping Challenges: Menahem Weiss, Dead Sea Works (Israel)
Boiler Feed Pump Aspects for Power Generation: Marchel Kalmanovich, Israeli Electric Corporation (Hevrat Hashmal)
Chemical Issues with Pumps: Boris Rechtman, ICL Chemicals (Israel)
Sessions #3 "Electrical Aspects"
Motor efficiency, VFD, controls, and line losses: Oscar Heinhorn, Enercom Engineering (Israel), Mario Berman, Israel Electric Corporation, and Arik Dan, Yaskawa (Japan)
Session #4
Positive Displacement Rotary Pumps: Jim Brennan, IMO/Colfax Pumps Corporation (USA/Europe), Maty De-Haas, Berlin Technologies (Israel), and Moshe Rozenbloom, Polak Brothers (Israel)
Session #5
Pumping Challenges at Municipalities: Eli Bronstein, Dimona vice-mayor (Israel)
Session #6
Mechanical Seals versus Seal-Less Pumps: Yossi Avisar, Laor Engineering (Israel), and Rammy Shellef, Ettem Seals (Israel)
Vibration Analysis for Rotating Machinery: Dr. Leonid Avrukh, PMME (Israel), and Dr. Elia Schwartz , Predictive Systems Engineering (Israel)
Cost (check or credit card):
Attendees: $100 (400 shekels) before September 15, 2010 ($200 after that date) - Group Discounts: 10% (5+ people) / 25% (10+ people) Exhibitors (tabletops): $1000 (4000 shekels) before September 15, 2010 ($2000 after that date)
To get more information about location, fees, display opportunities or on other questions to Advisory Committee, contact Dr. L. Nelik, P.E., by phone:
Calculation of Pumpable Ice Machine Capacity
- by VK 10/08/2010 @ 04:31
Dr. Boris Menin has published a new article "CALCULATION OF PUMPABLE (SLURRY) ICE MACHINE CAPACITY" in journal "Scientific Israel – Technological Advantages", vol. 12, #2, 2010.
The article is dedicated to support everyday engineering problems and to develop a single simplified method that allows the use of engineering judgment based on experience. It enhances ability to understand the relative impact of the main technical and technological parameters of Pumpable Ice (PI) production makers.
Dr. Boris Menin has published a new article "CALCULATION OF PUMPABLE (SLURRY) ICE MACHINE CAPACITY" in journal "Scientific Israel – Technological Advantages", vol. 12, #2, 2010.
The article is dedicated to support everyday engineering problems and to develop a single simplified method that allows the use of engineering judgment based on experience. It enhances ability to understand the relative impact of the main technical and technological parameters of Pumpable Ice (PI) production makers.
Starting with today's (03/08/2010) issue of our newsletter, every week, we will publish short tips on how to write English.
Writing Tips provided by the WhiteSmoke Inc., and published with kind permission of the company.
All published tips will be collected in the Blog section of our site.
Starting with today's (03/08/2010) issue of our newsletter, every week, we will publish short tips on how to write English.
Writing Tips provided by the WhiteSmoke Inc., and published with kind permission of the company.
All published tips will be collected in the Blog section of our site.
I have enjoyed working with this very talented team in the past and am looking forward to seeing their future inventions. They are bound to be innovative and promote cost savings.
Best,
Rich
Special !
Write English with confidence. WhiteSmoke Writer 2010+
All-in-one tool for proofreading and editing your writing:
VK-Engineering.com supported by the engineering community donations. Donate and help us build a better website for engineers and professionals. THANK YOU!
Molecular Video
...More About
Members : 13
Member online:
Anonymous online: 2
Total visits: 71404 
Top 
